Night Switch Trinity!

Lixirskin is a brand that was introduced to me through the October 2017 VictoriaHealth Newsletter. VictoriaHealth is a UK online retailer selling products such as food supplements, healthcare products, and skincare products. They are also responsible for launching NIOD and The Ordinary to the world. Reading the monthly newsletter from Gill (who’s one of the founders of this website) is akin to reading a personal letter from one of my trusted old-time friends and I trust Gill’s impeccable recommendations.

Lixirskin is the baby of Colette Haydon, who is a doctor in dermo-pharmacy, and has over 20 years of experience in formulating skincare. She has her own laboratory in London called Elixir de Beaute.  Together with her team, she had formulated hundreds of products for many of the most coveted beauty brands such as HealGel, Jo Malone, Aromatherapy Associates and REN. In fact, I’m pretty sure that you probably have one of her formulations in your bathroom or vanity table. Colette Haydon describes Lixir as a mix of hard working, everyday products and targeted molecules, an advanced yet relaxed approach to skin care. I was attracted to her products, especially her 3 Night Switch products which are treatments for specific skin concerns and formulated with pure active molecules for targeted results. They are for nighttime use, when your skin switches to repair mode and are to be mixed with a moisturiser. You should only use one at a time, then give your skin a rest before switching to another. Switching stimulates the skin to get better results. Colette Haydon recommends the following sequence of using the Night Switch treatments:

  • Ageing Skin (wrinkles, sagging, sun damage):  Four weeks retinol + Two weeks PHA.
  • Problem Skin (dull, open pores, breakouts): Four weeks retinol + Three weeks BHA.

I’ve been using these products for a total of 10 weeks and I’m finally ready to reveal my thoughts on them. One thing that I need to inform you guys is that while I was testing all the night switch products for the whole 10 weeks duration, I stopped using all other actives in order to accurately judge the effects of these products.

I love its aesthetics!

How does the LIXIRSKIN Night Switch BHA/AHA 10% fare?

The LIXIRSKIN Night Switch BHA/AHA 10% was the first night switch that I’d started off with. As per the instructions given on the box, I tested this product for 4 weeks before I start on another night switch. Unlike the PHA/AHA as well as the Retinol night switch products, it was recommended that the BHA/AHA night switch should be applied to bare skin followed by a moisturiser. The other 2 night switch products were recommended to be mixed into your moisturiser before application.

Ingredients for LIXIRSKIN Night Switch BHA/AHA 10%

Propanediol, Aqua (Water), Alcohol Denat., Lactic Acid, Azelaic Acid, Salicylic Acid, Sodium Lactate.

From the ingredients list as above, you could tell that this product consists mainly of a blend of 3 acids, namely Lactic Acid (AHA), Azelaic Acid (dicarboxylic acid) and Salicylic Acid (BHA). Each acid offers a special benefit – Lactic Acid improves hydration, Salicylic Acid is antibacterial and prevents clogged pores, and Azelaic Acid controls sebum.

Because I’m already an experienced acid user (as in I’ve been using AHAs and BHAs products for quite some time), I didn’t experience any marvellous life-changing skin benefits. However, the quality of my skin didn’t regress when I started on this product and except for one or two of my usual hormonal acne appearing due to my period, I didn’t have too much issues with clogged pores or blemishes. I guess that’s one of the signs that this product is working for me since I’m so congestion-prone. This product also feels gentle (I mean, gentle for my very acid-experienced skin) on my skin and I’ve never felt any stinging sensation when I used it. I have a feeling that even if you are an acid newbie, your skin won’t be adverse to this product, unless of course if you have ultra-sensitive skin or if you are allergic to any of the ingredients.

How does the LIXIRSKIN Night Switch PHA/AHA 10% fare?

The LIXIRSKIN Night Switch PHA/AHA 10% is an intriguing product to me. Besides the more commonly found Lactic Acid, this product also contains 2 additional acids which were new to me, namely Lactobionic Acid and Phytic Acid. Lactobionic Acid supposedly reduces oxidative stress while Phytic Acid eliminates heavy metals to detoxify the skin. You are supposed to mix this product with your moisturiser and then apply it to your skin.

Ingredients for LIXIRSKIN Night Switch PHA/AHA 10%

Aqua (Water), Sodium Lactate, Lactic Acid, Lactobionic Acid, Phytic Acid, Benzyl Alcohol.

As per the instructions, I tested this product for around 2 weeks before I switch to the final Retinol Night Switch. In my opinion, I didn’t really think that 2 weeks is sufficiently long enough for me to observe its effects fully. However, what I had noticed during that 2 weeks seemed promising. When I first tried using this product, I didn’t read the instructions and ended up using it neat on my skin instead of mixing it with a moisturiser. I actually felt a strong stinging sensation when I tried using it that way, which surprised me greatly since I thought that my skin was used to acids. However when I mixed this product with my moisturiser, I didn’t feel the stinging sensation. Currently my biggest problem when it comes to pigmentation issues that my skin is facing isn’t freckles or sunspots. It’s actually ugly brown post-inflammatory hyperpigmentation (PIH) that I get once my hormonal acne goes away. So even if I don’t have active acne problems, there are still around 4 major brown spots on my cheek area due to the PIH. It pisses me off so much that I had even considered undergoing laser treatment to remove them.

Anyway, during the 2 weeks of testing this product, I somehow saw that those marks seemed to lighten slightly (note that I wasn’t using any dedicated Vitamin C serums since I had started testing these products to gauge their effectiveness). It surprised me greatly since AHA products usually do not tend to have much effect on my PIH. It usually helps more in terms of general evening of skin tone and keeping my clogged pores away. So that’s the reason why although I can’t confirm its exact long-term effects, the initial result was encouraging to me.

How does the LIXIRSKIN Night Switch Retinol 1% fare?

The LIXIRSKIN Night Switch Retinol 1% was the last night switch that I had tried. As recommended, I had tested this product for around 4 weeks before I feel confident enough to give some sort of opinion on it. The thing about retinol products is that it actually takes an even longer time than acids to show some (or even any!) effects on your face. In fact, most non-prescriptive retinols take 3 to 6 months to show improvements, with best results after 12 months. Although Retin-A works quicker (around 6-8 weeks for visible improvements, with dramatic results in 6 months), side effects such as redness, flakiness and peeling often means that people give up much sooner than the time it takes to see real results.

Ingredients for LIXIRSKIN Night Switch Retinol 1%

Aqua (Water), Phospholipids, Leuconostoc/Radish Root Ferment Filtrate, Retinol, Phenoxyethanol, Benzoic Acid, Glyceryl Laurate, EDTA, Dehydroacetic Acid, Ethylhexylglycerin.

Initial results that I had observed after using this product for around 4 weeks include softer skin, slight lessening of fine lines on my forehead and eye area and an overall firmer and lifted skin, especially around my jawline. Although I think that I definitely need a longer period of use to fully assess the results, these results after only 4 weeks are highly impressive to me. This night switch product might be my favourite one of all!

In Conclusion…

I think that LIXIRSKIN’s range of Night Switch products definitely works and would probably work better if you used them consistently over the period of one whole year. They are pretty stable non-irritating formulas with strong scientific backing on the effectiveness of all the ingredients included in the product. In other words, they work and they are scientifically proven to do so.

Where can you find them?

I bought all the products from VictoriaHealth Online.

Night Switch BHA/AHA 10% retails at £20.00 (15ml sized), Night Switch PHA/AHA 10% retails at £20.00 (15ml sized) and Night Switch Retinol 1% retails at £28.00 (15ml sized).

You can also purchase them from their official website.

Thank you for reading!

7 Comments on “Review – LIXIRSKIN Night Switch Retinol 1%, PHA/AHA 10% and BHA/AHA 10%

  1. Hi,
    You said you didnt use any other actives. But i have good genes and luna that i use currently. But i also wanna try Lixir. can i switch them up? like one week use lixir. next use sunday riley


    • If I’m not wrong, Good Genes is mainly AHAs and Luna is mainly Retinol. If you are seeking to add Lixir Skin’s night switch, I would suggest that you add the BHA/AHA 10% if you are looking to add all the acrives


    • You can definitely use Good Genes for one week, switch to Lixir skin for another and use the Luna for the following week. The main reason why I didn’t use any other active during the 10 weeks I was testing the products was so that I wouldn’t be confused over which product was responsible for either the positive or negative effects that I see on my face. Hope that clarifies!


  2. You can definitely use Good Genes for one week, switch to Lixir skin for another and use the Luna for the following week. The main reason why I didn’t use any other active during the 10 weeks I was testing the products was so that I wouldn’t be confused over which product was responsible for either the positive or negative effects that I see on my face. Hope that clarifies!


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: